In the above scenario, Z•600 communication features
(paging, door speaker communications, relay activation, etc.)
would be accessed from Line 1 only. The Z•600 can be
assigned to whatever line you desire. Multiple Z•600’s can
give you communications features on up to four different
lines. As the TELEMUTE feature will only be available on
the Z•600 line, we recommend that you put the Z•600 on
the most often used voice line.
If desired, a dedicated ELAN feature line can be easily set up
without an incoming C.O. line. Simply decide which line of
your system you want to carry the ELAN features and take
the Z•600 PHONE OUT to that input. In this scenario the
TELMUTE feature will not be operative.
CONNECTING FAX MACHINES, MODEMS,
CALLER ID BOXES, ETC.
FAX machines, Modems, and Alarm Systems, if not already
on a separate phone line, should be wired “in front” of the
Z•600 as shown below. Caller ID boxes should be wired
“in front” of the Z•600 as well.
NOTE: A single telephone
wall jack can also be
wired for use with Fax
Machines, etc. Simply
wire the outer pair of the
4 conductors coming to
the wall jack “in front” of
the Z•600. The Z•600 uses
inner pair of wires.
Comments to this Manuals